Dinçel Drainage Resistance cables are designed to be installed inside pipes to drain water from defrost cooling equipment mounted in cold rooms.
They operate only during defrost cycles.
To ensure the long life of these resistances, we recommend using a control device.
Note: The most commonly used power rating is 50 W/m. Additionally, we suggest using a range of 40 W/m for plastic pipes.
These highly flexible drainage heating cables are fast, safe, and very easy to use. Standard models or custom designs according to your needs overcome most of the problems you may encounter during installation. For more information, contact Dinçel Resistance now.
It is used to prevent water inside drainage lines from freezing. In industrial cooling units, it is wrapped around the edges of fans to melt the radiator. It can be used against all kinds of freezing in supermarket freezers, air conditioners, and aquariums.
All drainage heaters are produced according to demand.
They are manufactured at the desired power based on our customers' requests.
Produced according to world standards at 50W/MT.
The hot zones vary according to demand, the cold zone is 1 meter.
Braided model.
| GLASS FIBER DIAMETER (MM) | 1.1 |
| HEATING WIRE | CHROMIUM-NICKEL OR COPPER-NICKEL |
| HEATING WIRE DIAMETER (MM) | 0.05-0.08 |
| CABLE DIAMETER (MM) | 5X5 |
| COATING | SILICONE ELASTOMER |
| TEMPERATURES WITHSTOOD BY CABLE (°C) | -60 to 180 |
| CABLE LENGTH RANGE (M) | 1-20 |
| POWER (W) | 15-50 |
| MAXIMUM VOLTAGE (V) | 500 |
| TOLERANCE VALUES | POWER +/-10% LENGTH +/-1% DIMENSIONS +/-0.2mm |
