Dinçel Drainage Resistance cables are designed to be installed inside pipes to drain water from defrost cooling equipment mounted in cold rooms.
They only operate during defrost cycles.
To ensure the long life of these resistors, we recommend using a control device.
Note: The most commonly used power rating is 50 W/m. Additionally, for plastic pipes, we recommend using the 40 W/m range.
These highly flexible drainage heating cables are fast, safe, and very easy to use. Standard models or custom designs tailored to your needs overcome most installation challenges. For more information, contact Dinçel Resistance now.
It is used inside drainage pipes to prevent water from freezing. In industrial cooling units, it is wrapped around the edges of fans to melt the radiator. It can be used against all kinds of freezing in supermarket refrigerators, air conditioners, aquariums, and more.
All drainage resistors are produced according to demand.
Produced at the desired power level according to customer requests.
Manufactured according to world standards at 50W/MT.
Hot zones vary according to demand, cold zone is 1 meter.
Non-braided model.
| GLASS FIBER DIAMETER (MM) | 1.1 |
| HEATING WIRE | CHROMIUM-NICKEL OR COPPER-NICKEL |
| HEATING WIRE DIAMETER (MM) | 0.05-0.08 |
| CABLE DIAMETER (MM) | 5X7 |
| JACKET | SILICONE ELASTOMER |
| JACKET | SILICONE ELASTOMER |
| CABLE OPERATING TEMPERATURE (°C) | -60 to 180 |
| CABLE LENGTH RANGE (M) | 1-20 |
| POWER (W) | 15-50 |
| MAXIMUM VOLTAGE | 500 |
| TOLERANCE VALUES | POWER +/-10% LENGTH +/- 1% DIMENSION +/-0.2mm |
