Dinçel Compressor Heaters are used to be mounted on compressors in order to achieve lower temperatures, faster full suction, and to prevent heavy lubrication.
We recommend using a control device to ensure the long service life of these heaters.
Crankcase heater resistors (heating belt, compressor heater) are designed for use in compressors to prevent oil from condensing. The crankcase heater must be wrapped around the compressor body to ensure full contact. This not only provides efficient heat transfer but also extends the lifespan of the heater.
| GLASS FIBER DIAMETER (MM) | 1.1 |
| HEATING WIRE | CHROMIUM-NICKEL OR COPPER-NICKEL |
| HEATING WIRE DIAMETER (MM) | 0.05–0.08 |
| CABLE DIAMETER (MM) | 67x5.5 |
| COATING | SILICONE ELASTOMER |
| TEMPERATURE RESISTANCE RANGE (°C) | -60 to 180 |
| CABLE LENGTH RANGE (M) | 0.40–30 |
| POWER (W) | 15–70 |
| MAXIMUM VOLTAGE (V) | 500 |
| TOLERANCE VALUES | POWER ±10% LENGTH ±1% DIMENSIONS ±0.2 mm |
