Dinçel Drainage Resistance cables are designed to be installed inside pipes to drain water from defrost cooling equipment mounted in cold rooms.
They operate only during defrost cycles.
To ensure the longevity of these resistances, we recommend using a control device.
Note: The most commonly used power rating is 50 W/m. Additionally, we advise using the 40 W/m range for plastic pipes.
These highly flexible drainage heating cables are fast, safe, and very easy to use. Standard models or custom designs tailored to your needs can overcome most installation challenges. For more information, contact Dinçel Resistance now.
It is used to prevent water from freezing inside drainage lines. In industrial cooling units, it is wrapped around fan edges to melt the radiator. It can be used against all kinds of freezing in supermarket ice cabinets, air conditioners, and aquariums.
All drainage resistors are produced according to demand.
They are manufactured with the desired power based on our customers' requests.
Produced according to world standards at 50W/MT.
The hot zones vary according to demand; the cold zone is 1 meter.
Non-braided model.
| GLASS FIBER DIAMETER (MM) | 1.1 |
| HEATING WIRE | CHROMIUM-NICKEL OR COPPER-NICKEL |
| HEATING WIRE DIAMETER (MM) | 0.05-0.08 |
| CABLE DIAMETER (MM) | 5X5 |
| COATING | SILICONE ELASTOMER |
| OPERATING TEMPERATURE RANGE | -60 to 180 °C |
| CABLE LENGTH RANGE (M) | 1-20 |
| POWER (W) | 15-50 |
| MAXIMUM VOLTAGE | 500 V |
| TOLERANCE VALUES | POWER +/-10% LENGTH +/- 1% SIZE +/-0.2mm |
